Thiết bị điều khiển lưu lượng Bronkhorst LOW-ΔP-FLOW F-202DV
Thiết bị Bronkhorst LOW-ΔP-FLOW F-202DV là bộ điều khiển lưu lượng khối lượng cho khí ăn mòn hoặc giảm áp suất thấp (Mass Flow Controller for low pressure drop or corrosive gas service) để đo chính xác phạm vi lưu lượng từ 0,28…14 l n / phút đến 0,5…25 l n / phút (tương đương N 2 ). Các thiết bị này đặc biệt phù hợp với khí ăn mòn hoặc các ứng dụng có chênh lệch áp suất rất thấp (∆P). So với các thiết bị thông thường, MFC LƯU LƯỢNG THẤP ∆P có kênh lưu lượng lớn hơn để giảm thiểu nguy cơ tắc nghẽn, tạo điều kiện vệ sinh và xả sạch, và gây ra độ sụt áp thấp hơn (cảm biến chỉ yêu cầu 0,5 đến 5 mbar).
Từ khóa liên quan F-202DV, LOW-ΔP-FLOW F-202DV
Low-Δpp-Plow, LOW-ΔP-FLOW F-202DV Mass Flow Controllers của Bronkhorst đã từng được đại lý Bronkhorst VN công ty TNHH EURODODO Hotline: 0374008015 email kinhdoanh@eurododo.com cấp hàng ở Việt Nam.
Thông số Bronkhorst LOW-ΔP-FLOW F-202DV Mass Flow Controllers
| Measurement / control system | |
|---|---|
| Flow range (intermediate ranges available) | min. 0,28…14 ln/min max. 0,5…25 ln/min (based on N2) |
| Accuracy (incl. linearity) (based on actual calibration) | ± 1 % FS |
| Repeatability | < 0,2 % RD |
| Turndown ratio | 1:50 (2…100%) |
| Max. operating pressure | 10 bar g |
| Multi fluid capability | Storage of max. 8 calibration curves |
| Settling time (in control, typical) | 2 … 3 sec. |
| Control stability | < ± 0,1 % FS (typical) |
| Operating temperature | -10 … +70 |
| Mounting | horizontal |
| Temperature sensitivity | < 0,1% FS/°C |
| Pressure sensitivity | 0,1% Rd/bar typical N2 |
| Max. Kv-value | 6,6 x 10-2 |
| Leak integrity, outboard | tested < 2 x 10-9 mbar l/s He |
| Warm-up time | 30 min. for optimum accuracy 2 min for accuracy ± 2% FS |
| Mechanical parts | |
|---|---|
| Material (wetted parts) | stainless steel 316L or comparable; other on request |
| Process connections | compression type or face seal (VCR/VCO) couplings |
| Seals | standard: FKM/Viton®; options: EPDM, FFKM/Kalrez®, FDA and USP Class VI approved compounds |
| Weight | 0,8 kg |
| Ingress protection | IP40 |
| Electrical properties | |||||
|---|---|---|---|---|---|
| Power supply | +15 … 24 Vdc | ||||
| Max. power consumption |
| ||||
| Analog output | 0…5 (10) Vdc or 0 (4)…20 mA (sourcing output) | ||||
| Digital communication | standard: RS232; options: PROFIBUS DP, CANopen®, DeviceNet™, PROFINET, EtherCAT®, Modbus RTU, ASCII or TCP/IP, EtherNet/IP, POWERLINK, FLOW-BUS | ||||
| Electrical connection | |
|---|---|
| Analog/RS232 | 9-pin D-connector (male); |
| PROFIBUS DP | bus: 9-pin D-connector (female); power: 9-pin D-connector (male); |
| CANopen® / DeviceNet™ | 5-pin M12-connector (male); |
| FLOW-BUS/Modbus-RTU/ASCII | RJ45 modular jack |
| Modbus TCP / EtherNet/IP / POWERLINK | 2 x RJ45 modular jack (in/out); |
| EtherCAT®/ PROFINET | 2 x RJ45 modular jack (in/out); |




Đánh giá
Chưa có đánh giá nào.