Bộ điều khiển lưu lượng cho khí ăn mòn Bronkhorst LOW-ΔP-FLOW F-201DV
Bộ điều khiển lưu lượng khối cho dịch vụ khí ăn mòn hoặc giảm áp suất thấp LOW-ΔP-FLOW F-201DV Mass Flow Controller for low pressure drop or corrosive gas service phù hợp để đo chính xác phạm vi lưu lượng từ 0,42…21 mln/phút đến 0,042…2,1 ln/phút (tương đương N2). Các thiết bị này đặc biệt phù hợp với khí ăn mòn hoặc các ứng dụng có chênh lệch áp suất rất thấp (∆P). So với các thiết bị thông thường, MFC LOW-∆P-FLOW có kênh lưu lượng lớn hơn để giảm thiểu nguy cơ tắc nghẽn, tạo điều kiện vệ sinh và xả khí, đồng thời giảm áp suất (cảm biến chỉ cần 0,5 đến 5 mbar).
Thông số LOW-ΔP-FLOW F-201DV Mass Flow Controller
| Measurement / control system | |
|---|---|
| Flow range (intermediate ranges available) | min. 0,42…21 mln/min max. 0,042…2,1 ln/min (based on N2) |
| Accuracy (incl. linearity) (based on actual calibration) | ± 1 % FS |
| Repeatability | < 0,2 % RD |
| Turndown ratio | 1:50 (2…100%) |
| Max. operating pressure | 10 bar g |
| Multi fluid capability | Storage of max. 8 calibration curves |
| Settling time (in control, typical) | 2 … 3 sec. |
| Control stability | < ± 0,1 % FS (typical) |
| Operating temperature | -10 … +70 °C |
| Mounting | horizontal |
| Temperature sensitivity | < 0,1% FS/°C |
| Pressure sensitivity | 0,1% Rd/bar typical N2 |
| Max. Kv-value | 6,6 x 10-2 |
| Leak integrity, outboard | tested < 2 x 10-9 mbar l/s He |
| Warm-up time | 30 min. for optimum accuracy 2 min for accuracy ± 2% FS |
| Mechanical parts | |
|---|---|
| Material (wetted parts) | stainless steel 316L or comparable; other on request |
| Process connections | compression type or face seal (VCR/VCO) couplings |
| Seals | standard: FKM/Viton®; options: EPDM, FFKM/Kalrez®, FDA and USP Class VI approved compounds |
| Weight | 0,6 kg |
| Ingress protection | IP40 |
| Electrical properties | |||||
|---|---|---|---|---|---|
| Power supply | +15 … 24 Vdc | ||||
| Max. power consumption |
| ||||
| Analog output | 0…5 (10) Vdc or 0 (4)…20 mA (sourcing output) | ||||
| Digital communication | standard: RS232; options: PROFIBUS DP, CANopen®, DeviceNet™, PROFINET, EtherCAT®, Modbus RTU, ASCII or TCP/IP, EtherNet/IP, POWERLINK, FLOW-BUS | ||||
| Electrical connection | |
|---|---|
| Analog/RS232 | 9-pin D-connector (male); |
| PROFIBUS DP | bus: 9-pin D-connector (female); power: 9-pin D-connector (male); |
| CANopen® / DeviceNet™ | 5-pin M12-connector (male); |
| FLOW-BUS/Modbus-RTU/ASCII | RJ45 modular jack |
| Modbus TCP / EtherNet/IP / POWERLINK | 2 x RJ45 modular jack (in/out); |
| EtherCAT®/ PROFINET | 2 x RJ45 modular jack (in/out); |
Bronkhorst® model F-201DV Mass Flow Controllers (MFCs) are suited for precise measurement of flow ranges between 0,42…21 mln/min and 0,042…2,1 ln/min (N2-equivalent). The instruments are particularly suited for corrosive gases or applications with very low differential pressure (∆P). Compared to conventional instruments, LOW-∆P-FLOW MFCs have larger flow channels to minimize the risk of clogging, facilitate cleaning and purging, and cause lower pressure drop (the sensor only requires 0,5 to 5 mbar).
The integrated digital pc-board provides signal and fieldbus conversion as well as PID controller functionality for mass flow control by means of the integrated control valve. In addition to the standard RS232 output the instruments also offer analog I/O. As an option, an on-board interface can be mounted to provide CANopen®, DeviceNet™, EtherCAT®, PROFIBUS DP, PROFINET, Modbus RTU, ASCII or TCP/IP, EtherNet/IP, POWERLINK or FLOW-BUS protocols.
Từ khóa liên quan F-201DS, LOW-ΔP-FLOW F-201DV Mass Flow
Low-Δpp-Plow F-201DS & LOW-ΔP-FLOW F-201DV Mass Flow của Bronkhorst đã từng được đại lý Bronkhorst VN công ty TNHH EURODODO Hotline: 0374008015 email kinhdoanh@eurododo.com cấp hàng ở Việt Nam.




Đánh giá
Chưa có đánh giá nào.