Đồng hồ đo lưu lượng Bronkhorst LOW-ΔP-FLOW F-103D
Thiết bị LOW-ΔP-FLOW F-103D Mass Flow Meter for low pressure drop or corrosive gas service là đồng hồ đo lưu lượng khối lượng Bronkhorst cho khí ăn mòn hoặc giảm áp suất thấp để đo chính xác phạm vi lưu lượng từ 0,8…40 ln/phút đến 3…150 ln/phút (tương đương N2). Các thiết bị này đặc biệt phù hợp với khí ăn mòn hoặc các ứng dụng có chênh lệch áp suất rất thấp (∆P). So với các thiết bị thông thường, các thiết bị đo LOW-∆P-FLOW có các kênh lưu lượng lớn hơn để giảm thiểu nguy cơ tắc nghẽn, tạo điều kiện vệ sinh và xả khí, và gây ra độ sụt áp thấp hơn (cảm biến chỉ cần 0,5 đến 5 mbar).
Từ khóa liên quan F-103D
Low-Δpp-Plow F-103D & Low-Δp-Flow F-103D của Bronkhorst đã từng được đại lý Bronkhorst VN công ty TNHH EURODODO Hotline: 0374008015 email kinhdoanh@eurododo.com cấp hàng ở Việt Nam.
Thông số Bronkhorst LOW-ΔP-FLOW F-103D Mass Flow Meter
| Measurement / control system | |
|---|---|
| Flow range (intermediate ranges available) | min. 0,8…40 ln/min max. 3…150 ln/min (based on N2) |
| Accuracy (incl. linearity) (based on actual calibration) | ± 1 % FS |
| Repeatability | < 0,2 % RD |
| Turndown ratio | 1:50 (2…100%) |
| Max. operating pressure | 10 bar g |
| Multi fluid capability | Storage of max. 8 calibration curves |
| Response time (sensor) | 1 … 2 sec. |
| Operating temperature | -10 … +70 °C |
| Mounting | horizontal |
| Temperature sensitivity | < 0,1% FS/°C |
| Pressure sensitivity | 0,1% Rd/bar typical N2; 0,01% Rd/bar typical H2 |
| Leak integrity, outboard | tested < 2 x 10-9 mbar l/s He |
| Warm-up time | 30 min. for optimum accuracy 2 min for accuracy ± 2% FS |
| Mechanical parts | |
|---|---|
| Material (wetted parts) | stainless steel 316L or comparable; other on request |
| Process connections | compression type or face seal (VCR/VCO) couplings |
| Seals | standard: FKM/Viton®; options: EPDM, FFKM/Kalrez®, FDA and USP Class VI approved compounds |
| Weight | 4,0 kg |
| Ingress protection | IP40 |
| Electrical properties | |||||
|---|---|---|---|---|---|
| Power supply | +15 … 24 Vdc | ||||
| Max. power consumption meter |
| ||||
| Max. Power consumption controller |
| ||||
| Analog output | 0…5 (10) Vdc or 0 (4)…20 mA (sourcing output) | ||||
| Digital communication | standard: RS232; options: PROFIBUS DP, CANopen®, DeviceNet™, PROFINET, EtherCAT®, Modbus RTU, ASCII or TCP/IP, EtherNet/IP, POWERLINK, FLOW-BUS | ||||
| Electrical connection | |
|---|---|
| Analog/RS232 | 9-pin D-connector (male); |
| PROFIBUS DP | bus: 9-pin D-connector (female); power: 9-pin D-connector (male); |
| CANopen® / DeviceNet™ | 5-pin M12-connector (male); |
| FLOW-BUS/Modbus-RTU/ASCII | RJ45 modular jack |
| Modbus TCP / EtherNet/IP / POWERLINK | 2 x RJ45 modular jack (in/out); |
| EtherCAT®/ PROFINET | 2 x RJ45 modular jack (in/out); |




Đánh giá
Chưa có đánh giá nào.