Đồng hồ đo lưu lượng Bronkhorst LOW-ΔP-FLOW F-103E
Thiết bị Bronkhorst LOW-ΔP-FLOW F-103E Mass Flow Meter for low pressure drop or corrosive gas service là đồng hồ đo lưu lượng khối lượng cho khí ăn mòn hoặc giảm áp suất thấp để đo chính xác phạm vi lưu lượng từ 0,9…45 l n / phút đến 4…200 l n / phút (tương đương N 2 ). Các thiết bị này đặc biệt phù hợp với khí ăn mòn hoặc các ứng dụng có chênh lệch áp suất rất thấp (∆P). So với các thiết bị thông thường, máy đo lưu lượng LOW-∆P-FLOW có kênh lưu lượng lớn hơn để giảm thiểu nguy cơ tắc nghẽn, tạo điều kiện vệ sinh và xả sạch, và gây ra độ sụt áp thấp hơn (cảm biến chỉ yêu cầu 0,5 đến 5 mbar).
Từ khóa liên quan F-103E, LOW-ΔP-FLOW F-103E
Low-Δpp-Plow F-103E & LOW-ΔP-FLOW F-103E của Bronkhorst đã từng được đại lý Bronkhorst VN công ty TNHH EURODODO Hotline: 0374008015 email kinhdoanh@eurododo.com cấp hàng ở Việt Nam.
Thông số Bronkhorst LOW-ΔP-FLOW F-103E Mass Flow Meter
| Measurement / control system | |
|---|---|
| Flow range (intermediate ranges available) | min. 0,9…45 ln/min max. 4…200 ln/min (based on N2) |
| Accuracy (incl. linearity) (based on actual calibration) | ± 1 % FS |
| Repeatability | < 0,2 % RD |
| Turndown ratio | 1:50 (2…100%) |
| Max. operating pressure | 10 bar g |
| Multi fluid capability | Storage of max. 8 calibration curves |
| Response time (sensor) | 1 … 2 sec. |
| Operating temperature | -10 … +70 °C |
| Mounting | horizontal |
| Temperature sensitivity | < 0,1% FS/°C |
| Pressure sensitivity | 0,1% Rd/bar typical N2; 0,01% Rd/bar typical H2 |
| Leak integrity, outboard | tested < 2 x 10-9 mbar l/s He |
| Warm-up time | 30 min. for optimum accuracy 2 min for accuracy ± 2% FS |
| Mechanical parts | |
|---|---|
| Material (wetted parts) | stainless steel 316L or comparable; other on request |
| Process connections | compression type or face seal (VCR/VCO) couplings |
| Seals | standard: FKM/Viton®; options: EPDM, FFKM/Kalrez®, FDA and USP Class VI approved compounds |
| Weight | 4,0 kg |
| Ingress protection | IP40 |
| Electrical properties | |||||
|---|---|---|---|---|---|
| Power supply | +15 … 24 Vdc | ||||
| Max. power consumption meter |
| ||||
| Max. Power consumption controller |
| ||||
| Analog output | 0…5 (10) Vdc or 0 (4)…20 mA (sourcing output) | ||||
| Digital communication | standard: RS232; options: PROFIBUS DP, CANopen®, DeviceNet™, PROFINET, EtherCAT®, Modbus RTU, ASCII or TCP/IP, EtherNet/IP, POWERLINK, FLOW-BUS | ||||
| Electrical connection | |
|---|---|
| Analog/RS232 | 9-pin D-connector (male); |
| PROFIBUS DP | bus: 9-pin D-connector (female); power: 9-pin D-connector (male); |
| CANopen® / DeviceNet™ | 5-pin M12-connector (male); |
| FLOW-BUS/Modbus-RTU/ASCII | RJ45 modular jack |
| Modbus TCP / EtherNet/IP / POWERLINK | 2 x RJ45 modular jack (in/out); |
| EtherCAT®/ PROFINET | 2 x RJ45 modular jack (in/out); |
Bronkhorst® model F-103E Mass Flow Meters (MFMs) are suited for precise measurement of flow ranges between 0,9…45 ln/min and 4…200 ln/min (N2-equivalent). The instruments are particularly suited for corrosive gases or applications with very low differential pressure (∆P). Compared to conventional instruments, LOW-∆P-FLOW meters have larger flow channels to minimize the risk of clogging, facilitate cleaning and purging, and cause lower pressure drop (the sensor only requires 0,5 to 5 mbar).
The integrated digital pc-board provides signal and fieldbus conversion as well as PID controller functionality for optional mass flow control by means of a (separately mounted) control valve. In addition to the standard RS232 output the instruments also offer analog I/O. As an option, an on-board interface can be mounted to provide CANopen®, DeviceNet™, EtherCAT®, PROFIBUS DP, PROFINET, Modbus RTU, ASCII or TCP/IP, EtherNet/IP, POWERLINK or FLOW-BUS protocols.




Đánh giá
Chưa có đánh giá nào.