Đồng hồ đo lưu lượng Bronkhorst IN-FLOW F-141MI
Đồng hồ đo lưu lượng khối lượng Bronkhorst IN-FLOW F-141MI mass flow meter (High-Pressure Mass Flow Meter for Gases, Industrial Style) phù hợp để đo chính xác các dải lưu lượng từ 0,3…15 mln/phút đến 2…100 ln/phút ở áp suất vận hành lên đến 700 bar. MFM bao gồm cảm biến lưu lượng khối nhiệt và bo mạch vi xử lý với chuyển đổi tín hiệu và bus trường và bộ điều khiển PID để điều khiển lưu lượng khối tùy chọn bằng van điều khiển gắn riêng.
Thông số Bronkhorst IN-FLOW F-141MI mass flow meter
| Measurement / control system | |
|---|---|
| Flow range (intermediate ranges available) | min. 0,3…15 mln/min max. 2…100 ln/min (based on N2) |
| Accuracy (incl. linearity) (based on actual calibration) | ±0,5% Rd plus ±0,1% FS |
| Repeatability | < 0,2 % RD |
| Turndown ratio | 1:50 |
| Multi fluid capability | Storage of max. 8 calibration curves |
| Response time (sensor) | typical: 0,5 sec. |
| Operating temperature | -10 … +70 °C for ATEX cat. 3 and FM Class 1 Div 2 : 0…50°C |
| Temperature sensitivity | zero: < 0,05% FS/°C; span: < 0,05% Rd/°C |
| Pressure sensitivity | 0,1% Rd/bar typical N2; 0,01% Rd/bar typical H2 |
| Leak integrity, outboard | tested < 2 x 10-9 mbar l/s He |
| Attitude sensitivity | max. error at 90° off horizontal 0,2% FS at 1 bar, typical N2 |
| Warm-up time | 30 min. for optimum accuracy 2 min for accuracy ± 2% FS |
| Mechanical parts | |
|---|---|
| Material (wetted parts) | stainless steel 316L or comparable |
| Pressure rating (PN) | 700 bar abs |
| Process connections | none, female thread; special high-pressure adapters on request |
| Seals | standard: FKM/Viton®; options: EPDM, FFKM/Kalrez® |
| Ingress protection | IP65 |
| Electrical properties | |||||
|---|---|---|---|---|---|
| Power supply | +15 … 24 Vdc | ||||
| Max. power consumption meter |
| ||||
| Max. Power consumption controller |
| ||||
| Analog output | 0…5 (10) Vdc or 0 (4)…20 mA (sourcing output) | ||||
| Digital communication | standard: RS232; options: CANopen®, DeviceNet™, EtherCAT®, PROFIBUS DP, PROFINET, Modbus RTU, ASCII or TCP/IP, EtherNet/IP, POWERLINK or FLOW-BUS | ||||
| Electrical connection | |
|---|---|
| Analog/RS232 | 8 DIN (male); |
| PROFIBUS DP | bus: 5-pin M12 (female); power: 8 DIN (male); |
| CANopen® / DeviceNet™ | 5-pin M12 (male); |
| FLOW-BUS/Modbus-RTU/ASCII | 5-pin M12 (male) |
| Modbus TCP / EtherNet/IP / POWERLINK | bus: 2 x 5-pin M12 (female) (in/out); power: 8 DIN (male); |
| EtherCAT®/ PROFINET | bus: 2 x 5-pin M12 (female) (in/out); power: 8 DIN (male) |
| IEC 61010-1 | IEC-61010-1:2010 including national deviations for UL (61010-1:2012) and CSA (C22.2 No. 61010-1-12) |
Bronkhorst® model F-141MI Mass Flow Meters (MFMs) are suited for precise measurement of flow ranges between 0,3…15 mln/min and 2…100 ln/min at operating pressures up to 700 bar. The MFM consists of a thermal mass flow sensor and a microprocessor based pc-board with signal and fieldbus conversion and a PID controller for optional mass flow control by means of a separately mounted control valve. The IN-FLOW model is of rugged design (IP65) for use in industrial environments or even Zone 2 hazardous areas, with optional ATEX Cat. 3 or FM Class I, Div. 2 approval.
IN-FLOW series are equipped with a digital pc-board, offering high accuracy, excellent temperature stability and fast response. The main digital pc-board contains all of the general functions needed for measurement and control. In addition to the standard RS232 output the instruments also offer analog I/O. As an option, an on-board interface can be mounted to provide CANopen®, DeviceNet™, EtherCAT®, PROFIBUS DP, PROFINET, Modbus RTU, ASCII or TCP/IP, EtherNet/IP, POWERLINK or FLOW-BUS protocols.
In-Flow F-141MI của Bronkhorst đã từng được đại lý Bronkhorst VN công ty TNHH EURODODO Hotline: 0374008015 email kinhdoanh@eurododo.com cấp hàng ở Việt Nam.




Đánh giá
Chưa có đánh giá nào.