Đồng hồ đo lưu lượng Bronkhorst IN-FLOW F-132MI
Đồng hồ đo lưu lượng khối lượng Bronkhorst IN-FLOW F-132MI mass flow meter (High-Pressure Mass Flow Meter for Gases, Industrial Style) để đo chính xác phạm vi lưu lượng từ 0,3…15 ln/phút đến 5…250 ln/phút ở áp suất vận hành lên đến 400 bar.
Bronkhorst IN-FLOW F-132MI mass flow meter bao gồm cảm biến lưu lượng khối nhiệt và bo mạch vi xử lý với chuyển đổi tín hiệu và bus trường và bộ điều khiển PID để điều khiển lưu lượng khối tùy chọn bằng van điều khiển gắn riêng. Model IN-FLOW có thiết kế chắc chắn (IP65) để sử dụng trong môi trường công nghiệp hoặc thậm chí là khu vực nguy hiểm Zone 2, với tùy chọn phê duyệt ATEX Cat. 3 hoặc FM Class I, Div. 2.
Từ khóa liên quan F-132MI
In-Flow F-132MI của Bronkhorst đã từng được đại lý Bronkhorst VN công ty TNHH EURODODO Hotline: 0374008015 email kinhdoanh@eurododo.com cấp hàng ở Việt Nam.
Thông số Bronkhorst IN-FLOW F-132MI mass flow meter
| Measurement / control system | |
|---|---|
| Flow range (intermediate ranges available) | min. 0,3…15 ln/min max. 5…250 ln/min (based on N2) |
| Accuracy (incl. linearity) (based on actual calibration) | ±0,5% Rd plus ±0,1% FS |
| Repeatability | < 0,2 % RD |
| Turndown ratio | 1:50 |
| Multi fluid capability | Storage of max. 8 calibration curves |
| Response time (sensor) | typical: 0,5 sec. |
| Operating temperature | -10 … +70 °C for ATEX cat. 3 and FM Class 1 Div 2 : 0…50°C |
| Temperature sensitivity | zero: < 0,05% FS/°C; span: < 0,05% Rd/°C |
| Pressure sensitivity | 0,1% Rd/bar typical N2; 0,01% Rd/bar typical H2 |
| Leak integrity, outboard | tested < 2 x 10-9 mbar l/s He |
| Attitude sensitivity | max. error at 90° off horizontal 0,2% FS at 1 bar, typical N2 |
| Warm-up time | 30 min. for optimum accuracy 2 min for accuracy ± 2% FS |
| Mechanical parts | |
|---|---|
| Material (wetted parts) | stainless steel 316L or comparable |
| Pressure rating (PN) | 400 bar abs |
| Process connections | compression type or face seal couplings |
| Seals | standard: FKM/Viton®; options: EPDM, FFKM/Kalrez® |
| Weight | 2,6 kg |
| Ingress protection | IP65 |
| Electrical properties | |||||
|---|---|---|---|---|---|
| Power supply | +15 … 24 Vdc | ||||
| Max. power consumption meter |
| ||||
| Max. Power consumption controller |
| ||||
| Analog output | 0…5 (10) Vdc or 0 (4)…20 mA (sourcing output) | ||||
| Digital communication | standard: RS232; options: CANopen®, DeviceNet™, EtherCAT®, PROFIBUS DP, PROFINET, Modbus RTU, ASCII or TCP/IP, EtherNet/IP, POWERLINK or FLOW-BUS | ||||
| Electrical connection | |
|---|---|
| Analog/RS232 | 8 DIN (male); |
| PROFIBUS DP | bus: 5-pin M12 (female); power: 8 DIN (male); |
| CANopen® / DeviceNet™ | 5-pin M12 (male); |
| FLOW-BUS/Modbus-RTU/ASCII | 5-pin M12 (male) |
| Modbus TCP / EtherNet/IP / POWERLINK | bus: 2 x 5-pin M12 (female) (in/out); power: 8 DIN (male); |
| EtherCAT®/ PROFINET | bus: 2 x 5-pin M12 (female) (in/out); power: 8 DIN (male); |
| IEC 61010-1 | IEC-61010-1:2010 including national deviations for UL (61010-1:2012) and CSA (C22.2 No. 61010-1-12) |




Đánh giá
Chưa có đánh giá nào.