Lưu lượng kế Bronkhorst IP65 MASS-STREAM D-6310 & D-6410
Lưu lượng kế nhiệt trực tiếp cho khí Bronkhorst MASS-STREAM D-6310 & D-6410 MFM Direct Thermal Mass Flow Meter for Gases, IP65 protected được bảo vệ IP65 để đo chính xác phạm vi lưu lượng từ 10…200 mln/phút đến 0,1…2 ln/phút ở áp suất vận hành giữa chân không và 10 bar (Nhôm) hoặc 20 bar (Thép không gỉ).
MASS-STREAM D-6310 & D-6410 MFM Direct Thermal Mass Flow Meter bao gồm cảm biến lưu lượng khối nhiệt trực tuyến (CTA) đã được chứng minh và bo mạch vi xử lý với chuyển đổi tín hiệu và bus trường và bộ điều khiển PID để điều khiển lưu lượng khối tùy chọn bằng van điều khiển gắn riêng. Thiết bị tuân thủ IP65 và có thể tùy chọn được trang bị màn hình hiện đại, đa chức năng và nhiều màu, với các nút vận hành trên thiết bị.
Thông số Bronkhorst MASS-STREAM D-6310 & D-6410 MFM Direct Thermal Mass Flow Meter
| Measurement / control system | |
|---|---|
| Flow range (intermediate ranges available) | min. 10…200 mln/min max. 0,1…2 ln/min (based on N2) |
| Accuracy (incl. linearity) (based on actual calibration) | ± 1,0 % RD plus ± 0.5% FS (at calibration conditions) |
| Repeatability | < 0,2 % FS |
| Turndown ratio | 1:20 |
| Type of gases | almost all gases, compatible with chosen materials |
| Response time (sensor) | approx. 0,3 sec. |
| Operating temperature | 0 … 50 °C |
| Storage / Transport conditions | with display : 0 … 50 °C, max. 95% RH (non-condensing); without display : -20 … +80 °C, max. 95% RH (non-condensing) |
| Temperature sensitivity | D-63xx : ±0,2% Rd/°C (Air) D-64xx : ±0,1% Rd/°C (Air) |
| Pressure sensitivity | ±0,3% Rd/bar typical (Air) |
| Leak integrity, outboard | tested < 2 x 10-8 mbar l/s He |
| Attitude sensitivity | at 90° deviation from horizontal max. error 0,2 % at 1 bar typical N2 |
| Warm-up time | 30 min. for optimum accuracy, within 30 seconds for accuracy ±4% FS |
| Mechanical parts | |
|---|---|
| Sensor | Stainless steel SS 316 (AISI 316L) |
| Instrument body | D-63xx : Aluminium AL 50ST/51ST (anodised) or stainless steel SS 316 / D-64xx : Aluminium EN AW-6082-T6 (non-anodised) or stainless steel SS 316 |
| Sieves and rings | Stainless steel SS 316 |
| Pressure rating (PN) | 10 bar g for instrument body in aluminium, 20 bar g for instrument body in stainless steel SS 316 |
| Process connections | G1/4″ (D-63xx : RP-type cavity / D-64xx : ISO1179-1 cavity) / compression type or face seal (VCR/VCO) couplings |
| Seals | standard: FKM/Viton®; option: EPDM, FFKM/Kalrez® |
| Weight | Aluminium: 1,0 kg Stainless steel: 1,5 kg |
| Ingress protection | IP65 |
| Electrical properties | |||||
|---|---|---|---|---|---|
| Power supply | +15 … 24 Vdc ±10% | ||||
| Max. power consumption |
| ||||
| Analog output | 0…5 (10) Vdc or 0 (4)…20 mA (sourcing output) | ||||
| Digital communication | standard: RS232 options: CANopen®, DeviceNet™, EtherCAT®, PROFIBUS DP, PROFINET, Modbus RTU, ASCII or TCP/IP, EtherNet/IP, POWERLINK or FLOW-BUS | ||||
| Electrical connection | |
|---|---|
| Analog/RS232 | 8 DIN (male); |
| PROFIBUS DP | bus: 5-pin M12 (female); power: 8 DIN (male) |
| CANopen® / DeviceNet™ | 5-pin M12 (male) |
| Modbus RTU / FLOW-BUS | 5-pin M12 (male) |
| Modbus TCP / EtherNet/IP / POWERLINK | bus: 2 x 5-pin M12 (female) (in/out); power: 8 DIN (male); |
| EtherCAT®/ PROFINET | bus: 2 x 5-pin M12 (female) (in/out); power: 8 DIN (male) |
Bronkhorst® models D-6310 and D-6410 Mass Flow Meters (MFMs) are suited for precise measurement of flow ranges between 10…200 mln/min and 0,1…2 ln/min at operating pressures between vacuum and 10 bar (Aluminium) or 20 bar (Stainless Steel). The MFM consists of a proven inline thermal (CTA) mass flow sensor and a microprocessor based pc-board with signal and fieldbus conversion and a PID controller for optional mass flow control by means of a separately mounted control valve. The instument is IP65 complient and can optionally be equipped with a modern, multi-functional and multi-colour display, with operator buttons on the instrument.
The digital MASS-STREAM™ series is characterized by a high degree of signal integrity and, as an option, up to 8 calibration curves of different gases and process conditions can be memorized in the instrument. In addition to the standard RS232 output the instruments also offer analog I/O. As an option, an on-board interface can be mounted to provide CANopen®, DeviceNet™, EtherCAT®, PROFIBUS DP, PROFINET, Modbus RTU, ASCII or TCP/IP, EtherNet/IP, POWERLINK or FLOW-BUS protocols.
Mass-Tream D-6310 của Bronkhorst đã từng được đại lý Bronkhorst VN công ty TNHH EURODODO Hotline: 0374008015 email kinhdoanh@eurododo.com cấp hàng ở Việt Nam.




Đánh giá
Chưa có đánh giá nào.