Bộ điều chỉnh lưu lượng Bronkhorst MASS-VIEW® MV-304
Bộ điều chỉnh lưu lượng khối cho khí có màn hình tích hợp MASS-VIEW® MV-304 Mass Flow Regulator for gases with integrated display để đo chính xác phạm vi lưu lượng từ 0,04…2 ln/phút đến 0,2…20 ln/phút ở áp suất vận hành lên đến 10 bar(g). MFR có màn hình OLED đồ họa tích hợp, có thể nhìn rõ ở góc rộng, cho phép đọc lưu lượng thực tế (giá trị và biểu đồ thanh), lưu lượng tổng và loại khí. Van kim chất lượng cao giúp điều chỉnh lưu lượng khí trơn tru và chính xác.
Mass-View MV-301 của Bronkhorst đã từng được đại lý Bronkhorst VN công ty TNHH EURODODO Hotline: 0374008015 email kinhdoanh@eurododo.com cấp hàng ở Việt Nam.
Thông số MASS-VIEW® MV-304 Mass Flow Regulator
| Measurement / control system | |
|---|---|
| Flow range (intermediate ranges available) | min. 0,04…2 ln/min max. 0,2…20 ln/min (based on N2) |
| Accuracy (incl. linearity) (based on actual calibration) | ± 2% Rd for flow > 50% of max. capacity; ± (1% Rd + 0,5% FS) on lower flows |
| Repeatability | < 0,2 % FS typical |
| Turndown ratio | up to 1 : 100 |
| Operating pressure | 0 … 10 bar(g) / 0 … 150 psi(g) |
| Pressure coefficient | ± 0,2% Rd/bar typical at Air |
| Pre-installed gases | Air, Ar, N2, O2, CO2, CH4, C3H8, N2O, CO and C4H10 |
| Standard calibration gas | Air, other gases are converted using our Fluidat® conversion model which will introduce extra inaccuracy |
| Response time (sensor) | 2 sec. |
| Operating temperature | 0 … 50 °C (32 … 122°F) |
| Temperature coefficient | Zero: <0,1% FS/°C, Span: <0,2% Rd/°C |
| Leak integrity, outboard | tested < 2 x 10-9 mbar l/s He |
| Attitude sensitivity | < 0,1 % FS |
| Mechanical parts | |
|---|---|
| Material (wetted parts) | Meter: Aluminium; Needle valve: SS316 |
| Test pressure | 21 bar(a) / 300 psi(a) |
| Process connections | G 1/4” BSPP female thread (compression fittings optional) |
| Seals | Viton®, PTFE |
| Weight | 0,7 kg |
| Ingress protection | IP40 |
| Electrical properties | |
|---|---|
| Power supply | +15 … 24 Vdc (+/- 10%) |
| Max. power consumption | approx. 135 mA |
| Analog output | 0 … 5 Vdc |
| Digital communication | RS232 / RS485 (Modbus RTU/ASCII) |
| Min. and max. relay contacts | switching current 0,5 A, 24 Vdc, one side grounded (0 Vdc power) |
| Electrical connection | 8-pin RJ-45 modular jack |
MASS-VIEW® model MV-304 Mass Flow Regulators (MFRs) are suited for precise measurement of flow ranges between 0,04…2 ln/min and 0,2…20 ln/min at operating pressures up to 10 bar(g). The MFR has an integrated graphical OLED display, clearly visible at wide angles, which allows reading of actual flow (value and a bar graph), total flow and type of gas. A high quality needle valve offers smooth and fine adjustment of the gas flow.
The display features easy set up via a user-friendly menu, using a 4-way navigation push button. The pre-installed gases eliminate the need to recalibrate for different gases and therefore reduce the cost of ownership. Additional features & functions include a variety of alarm and counter functions, an analog output signal, digital interfaces and two relay contacts.
The MASS-VIEW® series provides modern, novel and economical alternative to variable area meters (VA meters), also known as purge meters. Unlike conventional VA meters these new flow meters measure mass flow instead of volume flow.




Đánh giá
Chưa có đánh giá nào.