Máy đo lưu lượng chất lỏng Bronkhorst ES-FLOW ES-103I
Máy đo lưu lượng chất lỏng siêu âm lưu lượng thấp Bronkhorst ES-FLOW ES-103I Low Flow Ultrasonic Liquid Flow Meter là đồng hồ đo lưu lượng chất lỏng (LFM) model ES-FLOW ES-103I phù hợp để đo chính xác phạm vi lưu lượng thể tích từ 2 đến 1500 ml/phút ở áp suất vận hành lên đến 10 bar. LFM bao gồm cảm biến lưu lượng siêu âm cải tiến và đầu đo được bảo vệ IP66/IP67 với màn hình LCD sáng và màn hình cảm ứng điện dung để điều chỉnh các cài đặt, ví dụ như chỉ báo lưu lượng, báo động, tổng hợp và kiểm soát (nếu có). Các thiết bị điện tử bao gồm bộ điều khiển PID để kiểm soát lưu lượng tùy chọn bằng van điều khiển hoặc bơm được lắp riêng. Model ES-FLOW™ ES-103I có mặt bích TriClamp hàn quỹ đạo cho các ứng dụng vệ sinh.
Dòng sản phẩm Bronkhorst ® ES-FLOW được trang bị bảng mạch điện tử kỹ thuật số, cung cấp độ chính xác cao, độ ổn định nhiệt độ tuyệt vời và phản hồi nhanh. Bảng mạch điện tử kỹ thuật số chính chứa tất cả các chức năng chung cần thiết cho phép đo và điều khiển. Ngoài đầu ra RS232 tiêu chuẩn, các thiết bị còn cung cấp I/O tương tự. Tùy chọn, có thể gắn giao diện trên bo mạch để cung cấp các giao thức CANopen®, DeviceNet™, EtherCAT®, PROFIBUS DP, PROFINET, Modbus RTU, ASCII hoặc TCP/IP, EtherNet/IP, POWERLINK hoặc FLOW-BUS.
Với sự ra mắt thế hệ thứ hai của dòng ES-FLOW, được chỉ định bằng hậu tố MkII, Bronkhorst đã nhận ra một số cải tiến quan trọng và các tùy chọn mới. Sau đây là những điểm nổi bật chính của MkII:
- Hygienic Standards 3-A
The ES-103I MkII with Tri-Clamp flanges is authorized by 3-A, meeting the highest hygienic standards. - Hygienic Flow Controller
Combining the ES-FLOW flow meter with a GEMÜ 650 pneumatic diaphragm valve makes an excellent hygienic flow controller for a wide range of applications within the Food & Beverage market. The GEMÜ valve is also 3-A authorized. - EC Regulation Nos. 1935/2004 and 2023/2006 (Food Contact Materials)
By meeting the requirements, Bronkhorst can provide a Manufacturer Declaration for these regulations. - Improved accuracy and rangeability
- Additional functionalities and EtherNet fieldbus options
Thông số kỹ thuật của Bronkhorst ES-FLOW ES-103I Low Flow Ultrasonic Liquid Flow Meter
| Measurement / control system | |
|---|---|
| Minimum full scale flow | MkI: 200 ml/min; MkII: 100 ml/min |
| Maximum full scale flow | 1500 ml/min |
| Minimum flow | 2 ml/min |
| Volume flow accuracy | MkI: ≤ ±1% Rd; MkII: ≤ ±0,8% Rd |
| Repeatability | ≤ 0,1% Rd ± 0,05 ml/min |
| Turndown ratio | digital 2:100 up to 2:1500 ml/min (full scale value scalable by the user); analog: 1:50 (2…100%); |
| Zero stability (ZS) | MkI: ≤ 1 ml/min; MkII: ≤ 0,4 ml/min |
| Fluids | liquids with sound speed between 1000 and 2000 m/s; fluid independent measurement; also suitable for non-conductive fluids |
| Response time (sensor) | ≤ 50 msec (t98%) |
| Refresh (cycle) time | ≤ 10 msec |
| Fluid temperature | -10 … 90 °C |
| Ambient temperature | 0 … 60 °C |
| Mounting | Any position, attitude sensitivity negligible. |
| Temperature accuracy | ± 1 °C |
| Mechanical parts | |
|---|---|
| Sensor | Straight tube, 1,3 mm ID |
| Material (wetted parts) | stainless steel 316L |
| Surface quality | Ra < 0,8 μm |
| Pressure rating (PN) | 10 barg; for elevated temperatures please consult factory |
| Process connections | 1/4” Triclamp flanges, DIN32676-C (welded); other on request |
| Seals | none |
| Weight | Meter: 1,3 kg; Controller: on request |
| Ingress protection | IP66 and IP67 |
| Electrical properties | |
|---|---|
| Power supply | + 15 … 24 Vdc |
| Max. power consumption | 2.8 W |
| Analog output | 0…5 (10) Vdc, min. load impedance > 2 kΩ; 0 (4)…20 mA (sourcing), max. load impedance < 375 Ω |
| Analog setpoint | 0…5 (10) Vdc, impedance > 100 kΩ; 0 (4)…20 mA, impedance ~100 Ω |
| Customised I/O | Analog control signal output: 0…10 Vdc or 4…20 mA; Pulse output; for more options, see Model number identification in our ES-FLOW brochure |
| Digital communication | Standard RS232; Options: CANopen®, DeviceNet™, EtherCAT®, PROFIBUS DP, PROFINET, Modbus RTU, ASCII or TCP/IP, EtherNet/IP, POWERLINK or FLOW-BUS |
| Electrical connection | |
|---|---|
| Analog/RS232 | 8-pin M12 connector (male) |
| Configured I/O / Actuator output | 8-pin M12 Connector (male) |
| Actuator/Remote display | 4-pin M8 connector (female) |
| PROFIBUS DP | bus: 5-pin M12 connector (female); power: 8-pin M12 connector (male) |
| CANopen® / DeviceNet™ | 5-pin M12 connector (male) |
| FLOW-BUS/Modbus-RTU/ASCII | 5-pin M12 connector (male) |
| Modbus TCP / EtherNet/IP / POWERLINK | 2 x 4-pin M12 connector female (in/out) |
| EtherCAT®/ PROFINET | 2 x 4-pin M12 connector female (in/out) |
| Approvals / certificates | |
|---|---|
| Food contact | EC 1935/2004; 3-A Sanitary standard on ES-103I MkII |
Từ khóa liên quan ES-103I và sản phẩm hãng Bronkhorst: Đồng hồ đo lưu lượng, cảm biến lưu lượng, lưu lượng kế, van điều khiển, van điều tiết, van tiết lưu, bộ điều khiển lưu lượng, van Bronkhorst, van tác động trực tiếp, Van Vary-P, Van điều khiển bằng ống dẫn, Van ống thổi bù áp suất, Van dòng chất lỏng, Van điều khiển thủ công, bơm Bronkhorst, bơm bánh răng quay, bơm piston, bơm thùy quay, bơm định lượng, bộ lọc khí Bronkhorst, Gas Flow Measurement, GAS flow controllers, Coriolis and ultrasonic flow meters, low flow rates of gases and liquids, liquid of vapour flow control, modules, Gas Flow, Liquid Flow, Vapour Flow, Flow Solutions, gas flow measurement, control instruments, FLEXI-FLOW Compact, Mass Flow & Pressure Meter / Controller, EL-FLOW Prestige, EL-FLOW Select, EL-FLOW Metal Sealed, IN-FLOW High-Flow, MASS-STREAM, LOW-ΔP-FLOW, IQ+FLOW, EL-FLOW Base, MASS-VIEW, mini CORI-FLOW Ex d, ES-FLOW, LIQUI-FLOW™, LIQUI-VIEW Base, MAG-VIEW, Pressure Meters & Pressure Controllers for GAS and LIQUID, EL-PRESS, Digital Electronic Pressure Meter, EL-PRESS Metal Sealed, IN-PRESS, IQ+FLOW, Ultra-compact Pressure Meter, Readout and Power Supply, Digital Power Supply / Readout & Control Modules, FlowWare, software, FlowSuite, FlowFix, FlowDDE, FlowPlot, FlowView, FLUICAL, Control Valves, IN-LINE Gas Filters, Liquid Flow Filters, Gas Mixing Chambers, Fieldbus Accessories, Cables, connectors, fieldbus system, Mounting parts, Mounting blocks, vibration dampeners, Pumps, Portable Calibrators. E-8000 advanced digital PS/Readouts, both single- and multi-channel configurations. BRIGHT series, compact local Readout/Control Modules. PiPS series, Plug-in Power Supplies, Battery Pack, Direct acting valves, Vary-P valves, Pilot-operated valves, Pressure compensated bellow valves, Liquid flow valves, Manual control valves, Filters for Mass Flow Meters / Controllers, O-rings: Viton; optional EPDM and FFKM, Liquid Flow Filters, rotary gear pumps, piston pumps, rotary lobe pump, Micro Dosing Pumps, FLOW-BUS™ and Modbus-RTU/ASCII, PROFIBUS DP, DeviceNet™ and CANopen, EtherCAT®, EtherNet/IP and Modbus-TCP/IP, PROFINET, Mixing Chambers for Creating Homogeneous Gas Mixtures.
ES Flow ES-103I của Bronkhorst đã từng được đại lý Bronkhorst VN công ty TNHH EURODODO Hotline: 0374008015 email kinhdoanh@eurododo.com cấp hàng ở Việt Nam.




Đánh giá
Chưa có đánh giá nào.