Bộ điều khiển lưu lượng Bronkhorst EL-FLOW Base F-201CB
Bộ điều khiển lưu lượng khối cho khí, tiêu chuẩn & đơn giản EL-FLOW Base F-201CB Mass Flow Controller for Gases, Standard & Straightforward là các thiết bị tiêu chuẩn và đơn giản phù hợp để đo lường chính xác và kiểm soát phạm vi lưu lượng từ 0,16…8 mln/phút đến 0,4…20 ln/phút ở áp suất vận hành từ chân không đến 10 bar(g). Các thiết bị EL-FLOW® Base được trang bị bảng mạch điện tử kỹ thuật số, cung cấp độ chính xác cao, độ ổn định nhiệt độ tuyệt vời và phản hồi nhanh. Ngoài I/O tương tự tiêu chuẩn, MFC còn cung cấp giao tiếp RS232 hoặc Modbus-RTU hoặc -ASCII.
Thông số EL-FLOW Base F-201CB Mass Flow Controller
| Measurement / control system | |
|---|---|
| Flow range (intermediate ranges available) | min. 0,16…8 mln/min max. 0,4…20 ln/min (based on N2) |
| Accuracy (incl. linearity) (based on actual calibration) | ± 1 % FS |
| Repeatability | < 0,2 % RD |
| Turndown ratio | 1:50 (2…100%) |
| Operating pressure | 0…10 bar g |
| Settling time (in control, typical) | approx. 1 sec. |
| Control stability | < ± 0,1 % FS (typical for 1 ln/min N2) |
| Operating temperature | 0 … 50 °C |
| Temperature sensitivity | zero: < 0,1% FS/°C; span: < 0,1% Rd/°C |
| Pressure sensitivity | < 0,15% Rd/bar at 4…10 bar(g); < 0,25% Rd/bar at 1…4 bar(g); < 0,5% Rd/bar at 0…1 bar(g) |
| Max. Kv-value | 6,6 x 10-2 |
| Leak integrity, outboard | tested < 2 x 10-9 mbar l/s He |
| Attitude sensitivity | max. error at 90° off horizontal 0,2% FS at 1 bar, typical N2 |
| Warm-up time | 30 min. for optimum accuracy 2 min for accuracy ± 2% FS |
| Mechanical parts | |
|---|---|
| Material (wetted parts) | stainless steel 316L or comparable |
| Process connections | compression type or face seal couplings |
| Seals | standard: Viton®; option: Kalrez® (FFKM) |
| Weight | 0,5 kg |
| Ingress protection | IP40 |
| Electrical properties | ||||
|---|---|---|---|---|
| Power supply | + 15 … 24 Vdc | |||
| Max. power consumption |
| |||
| Analog output | 0…5 (10) Vdc or 0 (4)…20 mA (sourcing output) | |||
| Digital communication | RS232 or Modbus-RTU or -ASCII (RS485) | |||
| Electrical connection | |
|---|---|
| Power/Analog/RS232/RS485 | 9-pin D-connector (male) |
Bronkhorst® EL-FLOW® Base model F-201CB Mass Flow Controllers (MFCs) are standard and straightforard instruments suited for precise measurement and control of flow ranges between 0,16…8 mln/min and 0,4…20 ln/min at operating pressures between vacuum and 10 bar(g). EL-FLOW® Base instruments are equipped with a digital pc-board, offering high accuracy, excellent temperature stability and fast response. In addition to the standard analog I/O the MFCs also offer RS232 or Modbus-RTU or -ASCII communication.
EL-Flow Basic F-201CB của Bronkhorst đã từng được đại lý Bronkhorst VN công ty TNHH EURODODO Hotline: 0374008015 email kinhdoanh@eurododo.com cấp hàng ở Việt Nam.




Đánh giá
Chưa có đánh giá nào.