Đại lý phân phối thiết bị Wilcoxon tại Việt Nam
Công ty TNHH EURODODO là đại lý phân phối thiết bị Wilcoxon tại Việt Nam (Wilcoxon Vietnam) sản phẩm: cảm biến, gia tốc kế, đồng hồ hiển thị, máy phát rung, bộ khuếch đại tín hiệu, Piezoelectric shakers máy lắc áp điện, cảm biến rung và tất cả các phụ kiện chính hãng.
 Thương hiệu |
 Wilcoxon |
| Sản phẩm |
Cảm biến đo độ rung
|
| Đại lý phân phối |
Công ty TNHH EURODODO |
| Địa chỉ |
6/33/7/4 Đường Vườn Lài P. An Phú Đông Q.12 TP.HCM |
| Liên hệ |
Kinhdoanh@eurododo.com |
| Số điện thoại |
0374008015 |
| Nơi nhập |
Wilcoxon Sensing Technologies – USA |
| Tình trạng hàng |
Mới 100% |
| Giờ làm việc |
Thứ 2-6: 8 giờ – 17 giờ; Thứ 7: 8 giờ – 12 giờ |
| Kho hàng |
Tại địa chỉ công ty (TPHCM) |
| Bảo hành |
12 tháng theo tiêu chuẩn của hãng Wilcoxon |
Sản phẩm của hãng Wilcoxon
Wilcoxon Sensing Technologies thuộc Tập đoàn Amphenol là nhà sản xuất và cung cấp giải pháp giám sát độ rung toàn cầu theo tiêu chuẩn ISO 9001: 2015. Sử dụng giám sát trên các máy công nghiệp quay bao gồm động cơ, quạt, máy bơm, hộp số, máy thổi, trục quay máy công cụ, máy nén, máy làm lạnh, con lăn và máy trộn…
| Model | Description |
| 746 | Underwater, integral cable, 100 mV/g |
| 754 | Miniature underwater accelerometer, 10 mV/g |
| 757 | Biaxial, low-profile, underwater accelerometer, 100 mV/g |
| HA100 | 40 mV/g accelerometer |
| HA100A | 20 mV/g accelerometer |
| HA100V | 20 mV/in/sec velocity sensor |
| LVEP050-TO5 | 50 mV/g embedded accelerometer, ultra-low power consumption, TO-5 case |
| LVEP100-TO5 | 100 mV/g embedded accelerometer, ultra-low power consumption, TO-5 case |
| LPA100T | 50 mV/g, dual-output industrial accelerometer and temperature sensor |
| LPA100T-D2 | 50 mV/g, dual-output industrial accelerometer and temperature sensor, Class I Div 2 certified |
| 793R | Accelerometer, 100 mV/g (±5%), top exit |
| 797R | Accelerometer, 100 mV/g (±5%), side exit |
| 793VR | Velocity sensor, 100 mV/in/sec (±10%), top exit |
| HV100 | 100 mV/g, M12 connector |
| HV201 | 100 mV/g, MIL-C-5015 connector |
| HV100LF-500 | 500 mV/g, M12 connector |
| HV201LF-500 | 500 mV/g, MIL-C-5015 connector |
| 793V | High performance |
| 797V | High-performance, low profile |
| 793VR | Radiation-resistant |
| 793V100-5 | High performance, tight ±5% sensitivity tolerance |
| 793V-5 | High performance, 500 mV/in/sec |
| 893V | Designed with fewer components for more reliable data |
| 786V | Wide frequency range |
| 993B-7-33 | 100 mV/g, integral Teflon cable, Intrinsically safe |
| 993B-7 | 100 mV/g, integral armored cable |
| 993B-6 | 50 mV/g, integral armored cable |
| 993B-5 | 25 mV/g, integral armored cable |
| 993A-5 | 100 mV/g, integral cable |
| 993A | 100 mV/g, side exit 4-pin Bendix connector |
| 993B-7-M12 | 100 mV/g, M12 connector |
| 993B-7-M12[CERT] | 100 mV/g, M12 connector, Intrinsically safe |
| 786T-IS | Intrinsically Safe, 100 mV/g, top exit |
| 787T-IS | Intrinsically Safe, 100 mV/g, side exit |
| 786T-D2 | Class I Div 2, 100 mV/g, top exit |
| 786T-500-IS | Intrinsically Safe, 500 mV/g, top exit |
| 787T-500-IS | Intrinsically Safe, 500 mV/g, sideexit |
| 786T-500-D2 | Class I Div 2, 500 mV/g, top exit |
| LPA100T-D2 | Class I Div 2, low power, low voltage, 50 mV/g, top exit |
| 786T | General purpose, 100 mV/g, top exit |
| 787T | General purpose, 100 mV/g, side exit |
| 786T-500 | Low frequency, 500 mV/g, top exit |
| 793T-3 | High performance, 100 mV/g, top exit |
| 797T-1 | High performance, 100 mV/g, side exit |
| 797LT | Low frequency, 500 mV/g, side exit |
| LPA100T | Low power, low voltage, 50 mV/g, top exit |
| LPA100T-D2 | Low power, low voltage, 50 mV/g, and temperature sensor |
| 786T-D2 | Accelerometer, 100 mV/g, and temperature sensor |
| 786-500-D2 | Low frequency, 500 mV/g, top exit MIL-C-5015 connector |
| 786-500-M12-D2 | Low frequency, 500 mV/g, top exit MIL-C-5015 connector |
| 787-500-D2 | Low frequency, 500 mV/g, side exit MIL-C-5015 connector |
| 787-500-M12-D2 | Low frequency, 500 mV/g, side exit M12 connector |
| 786A-D2 | Industry favorite, top exit MIL-C-5015 connector |
| 787A-D2 | Industry favorite, side exit MIL-C-5015 connector |
| 780A-D2 | Compact, top exit MIL-C-5015 connector |
| 786F-D2 | Integral cable, top exit |
| 786A-M12-D2 | Top exit M12 connector |
| 787A-M12-D2 | Side exit M12 connector |
| 787A-M8-D2 | Side exit MIL-C-5015 connector, M8 mount |
| 993B-7-M12[CERT] | Triaxial, 100 mV/g |
| 786T-IS | Accelerometer and temperature sensor, 100 mV/g |
| 786-500-IS | Low frequency, 500 mV/g, top exit MIL-C-5015 connector |
| 786-500-M12-IS | Low frequency, 500 mV/g, top exit M12 connector |
| 787-500-IS | Low frequency, 500 mV/g, side exit MIL-C-5015 connector |
| 787-500-M12-IS | Low frequency, 500 mV/g, side exit M12 connector |
| 712E/CC712E | Operation to 260°C, charge mode accelerometer and amplifier system, 20 mV/g, ATEX certified |
| 786A-IS | Industry favorite, top exit MIL-C-5015 connector |
| 787A-IS | Industry favorite, side exit MIL-C-5015 connector |
| 780A-IS | Compact, top exit MIL-C-5015 connector |
| 786F-IS | Integral cable, top exit |
| 786A-M12-IS | Top exit M12 connector |
| 787A-M12-IS | Side exit M12 connector |
| 787A-M8-IS | Side exit MIL-C-5015 connector, M8 mount |
| HT780A | Operation to 165°C, 100 mV/g, compact, top exit |
| HT786A | Operation to 165°C, 100 mV/g, top exit |
| HT787A | Operation to 165°C, 100 mV/g, side exit |
| 793-6 | Operation to 150°C, 100 mV/g, top exit |
| 797-6 | Operation to 150°C, 100 mV/g, side exit |
| 376 | Operation to 260°C, charge mode accelerometer, 25 pC/g |
| 376/CC701HT | Operation to 260°C, charge mode accelerometer and amplifier system, 100 mV/g |
| 712E/CC712E | Operation to 260°C, charge mode accelerometer and amplifier system, 20 mV/g, ATEX certified |
| 731A | Seismic sensor, 10 V/g |
| 731-207 | Compact seismic sensor, 10 V/g |
| 731A/P31 | Seismic sensor and amplifier system, selectable sensitivity |
| 799M | Ultra-high sensitivity, ultra-low noise, filtered, 1 V/g |
| 786LF | Ultra low frequency, 100 mV/g |
| 786LF-500 | Ultra low frequency, high gain |
| 786LF-250 | Ultra low frequency, high gain, 250 mV/g |
| 793L | High performance, top exit MIL-C-5015 connector |
| 797L | High-performance, top exit MIL-C-5015 connector |
| 797L-3 | High-performance, side edit MIL-C-5015 connector, 200 mV/g |
| 799LF | Ultra-low noise sensor, filtered |
| HV201LF-500 | High EMI resistance, MIL-C-5015 connector |
| HV100LF-500 | High EMI resistance, M12 connector |
| 728A | Compact, side exit microdot connector |
| 728T | Compact, top exit microdot connector |
| 786-500 | Top exit MIL-C-5015 connector |
| 787-500 | Side exit MIL-C-5015 connector |
| 787-500-M12 | Side exit M12 connector |
| 712F | Integral cable, side exit, 8-32 mounting thread |
| 712F-M4 | Integral cable, side exit, M4 mounting thread |
| 907F | Integral cable, side exit, stud or adhesive mounting |
| 736 | Miniature, side-exit 10-32 connector |
| 736T | Miniature, top exit microdot connector |
| 997 | Integral cable, side exit, 8-32 mounting thread |
| 997-M4 | Integral cable, side exit, M4 mounting thread |
| 793-10 | High performance, top exit MIL-C-5015 connector |
| 732A | Miniature, side exit microdot connector |
| 732AT | Miniature, top exit microdot connector |
| 732-1D | Miniature, top exit BNC connector |
| 786A-I | Top exit MIL-C-5015 connector |
| 726 | Miniature, side-exit 10-32 connector |
| 726T | Miniature, top exit 10-32 connector |
| 766 | Top exit MIL-C-26482 3-pin bayonet connector |
| 777 | Top exit 2-position terminal block connector |
| 777B | Top exit BNC connector |
| 786C | Top exit BNC connector |
| 786F | Top exit Teflon jacketed cable |
| 787F | Side exit Teflon jacketed cable |
| SM102 | Side exit IP68 molded integral cable, pivoting base |
| SM103 | Side exit armored integral cable, pivoting base |
| 780FM-2-J88C | Top exit integral cable and magnet mount, for walkaround vibration monitoring |
| 786A-M12-D2 | Class I Div 2, 100 mV/g, top exit |
| 787A-M12-D2 | Class I Div 2, 100 mV/g, side exit |
| 786A-M12 | Top exit M12 connector |
| 787AM8-M12 | Side exit M12 connector, M8 mounting screw, ±5% sensitivity tolerance |
| 787BM8-M12 | Side exit M12 connector, M8 mounting screw, ±10% sensitivity tolerance |
| 786A | Industry favorite, top exit, ±5% sensitivity tol |
| 787A | Industry favorite, side exit, ±5% sensitivity tol |
| 786B-10 | Top exit, ±10% sensitivity tol |
| 787B | Side exit, ±10% sensitivity tol |
| 780A | Compact, top exit, ±5% sensitivity tolerance |
| 780B | Compact, top exit, ±10% sensitivity tolerance |
| 780C | Compact, top exit, ±15% sensitivity tolerance |
| 785A | Compact, side exit, ±10% sensitivity tolerance |
| 787AM8 | Side exit, M8 mounting screw |
| 793 | High performance, top exit |
| 793I | High performance, top exit, reduced ignition spark interference |
| 797 | High-performance, side exit |
| PCC420AP-10-R6 | Acceleration, peak, 10 g |
| PCC420AP-20-R6 | Acceleration, peak, 20 g |
| PCC421AR-05-M12-4 | Acceleration, RMS, 5 g, low profile M12 connector |
| PCC420AR-10-R6 | Acceleration, RMS, 10 g |
| PC420AP-05 | Acceleration, peak, 5 g |
| PC420AP-10 | Acceleration, peak, 10 g |
| PC420AP-20 | Acceleration, peak, 20 g |
| PC420AP-50 | Acceleration, peak, 50 g |
| PC420AR-05 | Acceleration, RMS, 5 g |
| PC420AR-10 | Acceleration, RMS, 10 g |
| PC420AR-20 | Acceleration, RMS, 20 g |
| PC420AR-50 | Acceleration, RMS, 50 g |
| PC420ATP-20 | Acceleration, true peak, 20 g |
| PCC420VP-10-R6 | Velocity, peak, 1.0 in/sec |
| PCC421VP-10-R6 | Velocity, peak, 1.0 in/sec, low profile MIL-C-5015 connector |
| PCC423VP-10-J9T2A | Velocity, peak, 1.0 in/sec, low profile integral cable |
| PCC420VP-10mm-R6 | Velocity, peak, 10 mm/sec |
| PCC420VP-20-R6 | Velocity, peak, 2.0 in/sec |
| PCC421VP-20-R6 | Velocity, peak, 2.0 in/sec, low profile MIL-C-5015 connector |
| PCC423VP-20-J9T2A | Velocity, peak, 2.0 in/sec, low profile integral cable |
| PCC420VR-10-R6 | Velocity, RMS, 1.0 in/sec |
| PCC421VR-10-M12-4 | Velocity, RMS, 1.0 in/sec, low profile M12 connector |
| PC420VP-05 | Velocity, peak, 0.5 in/sec |
| PC420VP-10 | Velocity, peak, 1.0 in/sec |
| PC420VP-20 | Velocity, peak, 2.0 in/sec |
| PC420VP-30 | Velocity, peak, 3.0 in/sec |
| PC420VP-50 | Velocity, peak, 5.0 in/sec |
| PC420VR-05 | Velocity, RMS, 0.5 in/sec |
| PC420VR-10 | Velocity, RMS, 1.0 in/sec |
| PC420VR-20 | Velocity, RMS, 2.0 in/sec |
| PC420VR-30 | Velocity, RMS, 3.0 in/sec |
| PC420VR-50 | Velocity, RMS, 5.0 in/sec |
| PC420DPP-40 | Displacement, peak to peak, 40 mils |
| PC420AP-05-IS | Acceleration, peak, 5 g |
| PC420AP-10-IS | Acceleration, peak, 10 g |
| PC420AP-20-IS | Acceleration, peak, 20 g |
| PC420AR-05-IS | Acceleration, RMS, 5 g |
| PC420AR-10-IS | Acceleration, RMS, 10 g |
| PC420AR-20-IS | Acceleration, RMS, 20 g |
| PC420VP-05-IS | Velocity, peak, 0.5 in/sec |
| PC420VP-10-IS | Velocity, peak, 1.0 in/sec |
| PC420VP-20-IS | Velocity, peak, 2.0 in/sec |
| PC420VP-30-IS | Velocity, peak, 3.0 in/sec |
| PC420VP-50-IS | Velocity, peak, 5.0 in/sec |
| PC420VR-05-IS | Velocity, RMS, 0.5 in/sec |
| PC420VR-10-IS | Velocity, RMS, 1.0 in/sec |
| PC420VR-20-IS | Velocity, RMS, 2.0 in/sec |
| PC420VR-30-IS | Velocity, RMS, 3.0 in/sec |
| PC420VR-50-IS | Velocity, RMS, 5.0 in/sec |
| PC420AP-05-EX | Acceleration, peak, 5 g |
| PC420AP-10-EX | Acceleration, peak, 10 g |
| PC420AP-20-EX | Acceleration, peak, 20 g |
| PC420AR-05-EX | Acceleration, RMS, 5 g |
| PC420AR-10-EX | Acceleration, RMS, 10 g |
| PC420AR-20-EX | Acceleration, RMS, 20 g |
| PC420VP-05-EX | Velocity, peak, 0.5 in/sec |
| PC420VP-10-EX | Velocity, peak, 1.0 in/sec |
| PC420VP-20-EX | Velocity, peak, 2.0 in/sec |
| PC420VP-30-EX | Velocity, peak, 3.0 in/sec |
| PC420VP-50-EX | Velocity, peak, 5.0 in/sec |
| PC420VR-05-EX | Velocity, RMS, 0.5 in/sec |
| PC420VR-10-EX | Velocity, RMS, 1.0 in/sec |
| PC420VR-20-EX | Velocity, RMS, 2.0 in/sec |
| PCH420V-R6 | HART-enabled, velocity, user-configurable full scale, MIL-C-5015 connector |
| PCH420V-M12 | HART-enabled, velocity, user-configurable full scale, M12 connector |
| PCH420V-R6-HZ | Class I Div 2 HART-enabled, velocity, user-configurable full scale, MIL-C-5015 connector |
| PCH420V-M12-HZ | Class I Div 2 HART-enabled, velocity, user-configurable full scale, M12 connector |
| PC420AP-05-DA | Acceleration, peak, 5 g, dynamic acceleration |
| PC420AP-10-DA | Acceleration, peak, 10 g, dynamic acceleration |
| PC420AP-20-DA | Acceleration, peak, 20 g, dynamic acceleration |
| PC420AR-05-DA | Acceleration, RMS, 5 g, dynamic acceleration |
| PC420AR-10-DA | Acceleration, RMS, 10 g, dynamic acceleration |
| PC420AR-20-DA | Acceleration, RMS, 20 g, dynamic acceleration |
| PCH420V-R6 | Velocity, user-configurable full scale, MIL-C-5015 connector |
| PCH420V-M12 | Velocity, user-configurable full scale, M12 connector |
| PCH420V-R6-HZ | Velocity, user-configurable full scale, MIL-C-5015 connector, Class I Div 2 |
| PCH420V-M12-HZ | Velocity, user-configurable full scale, M12 connector, Class I Div 2 |
| 786A-IS | General purpose, 100 mV/g |
| 787A-IS | General purpose, 100 mV/g, low profile |
| 780A-IS | General purpose, 100 mV/g, compact |
| 786A-M12-IS | General purpose, 100 mV/g, M12 connector |
| 787A-M8-IS | General purpose, 100 mV/g, low profile, M8 mounting screw |
| 786F-IS | General purpose, 100 mV/g, integral cable |
| 786-500-IS | Low frequency, high sensitivity, 500 mV/g |
| 786-500-M12-IS | Low frequency, high sensitivity, 500 mV/g, M12 connector |
| 787-500-IS | Low frequency, high sensitivity 500 mV/g, low profile |
| 787T-IS | Dual output vibration and temperature sensor, 100 mV/g, side exit |
| 786T-500-IS | Dual output vibration and temperature sensor, low frequency, 500 mV/g, top exit |
| 787T-500-IS | Dual output vibration and temperature sensor, low frequency, 500 mV/g, side exit |
| 993B-7-33 | Triaxial with integral cable, 100 mV/g |
| 786A-D2 | General purpose, 100 mV/g |
| 787A-D2 | General purpose, 100 mV/g, low profile |
| 780A-D2 | General purpise, 100 mV/g, compact |
| 787A-M8-D2 | General purpose, 100 mV/g, low profile, M8 mounting screw |
| 786F-D2 | Class I Div 2, general purpose, 100 mV/g, integral cable |
| 786-500-D2 | Low frequency, high sensitivity, 500 mV/g |
| 786-500-M12-D2 | Low frequency, high sensitivity, 500 mV/g, M12 connector |
| 787-500-D2 | Low frequency, high sensitivity 500 mV/g, low profile |
| 786T-500-D2 | Dual output vibration and temperature sensor, low frequency, 500 mV/g, top exit |
| LPA100T-D2 | Low power, low voltage, dual output of temperature |
| PC420AP-05-IS | Acceleration, peak, 5 g |
| PC420AP-10-IS | Acceleration, peak, 10 g |
| PC420AP-20-IS | Acceleration, peak, 20 g |
| PC420AR-05-IS | Acceleration, RMS, 5 g |
| PC420AR-10-IS | Acceleration, RMS, 10 g |
| PC420AR-20-IS | Acceleration, RMS, 20 g |
| PC420VP-05-IS | Velocity, peak, 0.5 in/sec |
| PC420VP-10-IS | Velocity, peak, 1.0 in/sec |
| PC420VP-20-IS | Velocity, peak, 2.0 in/sec |
| PC420VP-30-IS | Velocity, peak, 3.0 in/sec |
| PC420VP-50-IS | Velocity, peak, 5.0 in/sec |
| PC420VR-05-IS | Velocity, RMS, 0.5 in/sec |
| PC420VR-10-IS | Velocity, RMS, 1.0 in/sec |
| PC420VR-20-IS | Velocity, RMS, 2.0 in/sec |
| PC420VR-30-IS | Velocity, RMS, 3.0 in/sec |
| PC420VR-50-IS | Velocity, RMS, 5.0 in/sec |
| PCH420V-M12-HZ | Velocity, HART-enabled, user-configurable full scale, M12 connector |
| PCH420V-R6-HZ | Velocity, HART-enabled, user-configurable full scale, MIL-C-5015 connector |
| PC420AP-05-EX | Acceleration, peak, 5 g |
| PC420AP-10-EX | Acceleration, peak, 10 g |
| PC420AP-20-EX | Acceleration, peak, 20 g |
| PC420AR-05-EX | Acceleration, RMS, 5 g |
| PC420AR-10-EX | Acceleration, RMS, 10 g |
| PC420AR-20-EX | Acceleration, RMS, 20 g |
| PC420VP-05-EX | Velocity, peak, 0.5 in/sec |
| PC420VP-10-EX | Velocity, peak, 1.0 in/sec |
| PC420VP-20-EX | Velocity, peak, 2.0 in/sec |
| PC420VP-30-EX | Velocity, peak, 3.0 in/sec |
| PC420VP-50-EX | Velocity, peak, 5.0 in/sec |
| PC420VR-05-EX | Velocity, RMS, 0.5 in/sec |
| PC420VR-10-EX | Velocity, RMS, 1.0 in/sec |
| PC420VR-20-EX | Velocity, RMS, 2.0 in/sec |
| iT150 series | Factory-configured intelligent vibration transmitter |
| iT300 | User-configurable intelligent vibration transmitter |
| iT301 | User-configurable intelligent vibration transmitter, Modbus enabled |
| iT401 | 4-20 mA vibration alarm module with three relays |
| REF2510R | ReferenceMate portable vibration reference source |
| REF001 | Universal mounting kit |
| REF002 | Metric mounting kit |
| REF003 | Universal AC adaptor |
| TAA01 | Triaxial mounting adapter |
| CBM-VIBE | Field commissioning tools product bundle |
| MAC200 | Handheld vibration meter |
| MAC800 | Handheld vibration meter kit |
| MAC800-IS | Intrinsically safe handheld vibration meter kit |
| MAC810 | Handheld vibration meter kit with strobe light |
| MAC820 | Handheld vibration meter kit with Bluetooth headphones |
| REF2510R | ReferenceMate portable vibration reference source |
| REF001 | Universal mounting kit |
| REF002 | Metric mounting kit |
| REF003 | Universal AC adaptor |
| TAA01 | Triaxial mounting adapter |
| R6Q-0-J9T2A-16 | 16ft cable, 200°C, Teflon jacket |
| R6Q-0-J9T2A-32 | 32ft cable, 200°C, Teflon jacket |
| R6Q-0-J9T2A-64 | 64ft cable, 200°C, Teflon jacket |
| R6Q-0-J9T2AS-16 | 16ft cable, 200°C, Teflon jacket with stainless steel overbraid |
| R6Q-0-J9T2AS-32 | 32ft cable, 200°C, Teflon jacket with stainless steel overbraid |
| R6Q-0-J9T2AS-64 | 64ft cable, 200°C, Teflon jacket with stainless steel overbraid |
| R6QI-0-J9T2A-16 | 16ft cable, 200°C, Teflon jacket |
| R6QI-0-J9T2A-32 | 32ft cable, 200°C, Teflon jacket |
| R6QI-0-J9T2A-64 | 64ft cable, 200°C, Teflon jacket |
| R6QI-0-J9T2AS-16 | 16ft cable, 200°C, Teflon jacket with stainless steel overbraid |
| R6QI-0-J9T2AS-32 | 32ft cable, 200°C, Teflon jacket with stainless steel overbraid |
| R6QI-0-J9T2AS-64 | 64ft cable, 200°C, Teflon jacket with stainless steel overbraid |
| R6QA-0-J9F-16 | 16ft cable, 200°C, Teflon jacket, foil shield with drain wire |
| R6QA-0-J9F-32 | 32ft cable, 200°C, Teflon jacket, foil shield with drain wire |
| R6QA-0-J9F-64 | 64ft cable, 200°C, Teflon jacket, foil shield with drain wire |
| R6W-0-J9T2A-16 | 16ft cable, 200°C, Teflon jacket |
| R6W-0-J9T2A-32 | 32ft cable, 200°C, Teflon jacket |
| R6W-0-J9T2A-64 | 64ft cable, 200°C, Teflon jacket |
| R6W-0-J9F-16 | 16ft cable, 200°C, Teflon jacket, foil shield with drain wire |
| R6W-0-J9F-32 | 32ft cable, 200°C, Teflon jacket, foil shield with drain wire |
| R6W-0-J9F-64 | 64ft cable, 200°C, Teflon jacket, foil shield with drain wire |
| R6W-0-J10-16 | 16ft cable, 125°C, Enviroprene jacket |
| R6W-0-J10-32 | 32ft cable, 125°C, Enviroprene jacket |
| R6W-0-J10-64 | 64ft cable, 125°C, Enviroprene jacket |
| R6W-0-J9T2AS-10 | 10ft cable, 200°C, Teflon jacket with stainless steel overbraid |
| R6W-0-J9T2AS-16 | 16ft cable, 200°C, Teflon jacket with stainless steel overbraid |
| R6W-0-J9T2AS-32 | 32ft cable, 200°C, Teflon jacket with stainless steel overbraid |
| R6W-0-J9T2AS-64 | 64ft cable, 200°C, Teflon jacket with stainless steel overbraid |
| R6-0-J9T2A-16 | 16ft cable, 200°C, Teflon jacket |
| RM12S-0-J9T4A-16 | 16 ft cable, 200°C, 4-conductor, shielded |
| RM12-ST-J10-10 | 10 ft cable, 125°C, 2-conductor, shielded |
| RM12-ST-J10-32 | 32 ft cable, 125°C, 2-conductor, shielded |
| RM12S-0-J84C-10 | 10 ft cable, 80°C, 4-conductor, shielded, coiled |
| R6WP-2-J88-06 | 6 ft cable, 2-conductor, to male BNC plug |
| R6WP-2-J88-10 | 10 ft cable, 2-conductor, to male BNC plug |
| R6WP-2-J88-16 | 16 ft cable, 2-conductor, to male BNC plug |
| R6WP-2-J88C-06 | 6 ft coiled cable, 2-conductor, to male BNC plug |
| R6WP-2-J88C-10 | 10 ft coiled cable, 2-conductor, to male BNC plug |
| R6WP-2-J88C-16 | 16 ft coiled cable, 2-conductor, to male BNC plug |
| RM12S-0-J84C-10 | 10 ft coiled cable, 4-conductor, shielded; 5-socket M12 sensor connector, stripped and tined end |
| R6QN-0-J9T2-16 | 16 ft cable, 150°C, Tefzel jacket; 2 socket Neoprene boot connector, 105°C, Tefzel insert |
| R6QN-0-J9T2-32 | 32 ft cable, 150°C, Tefzel jacket; 2 socket Neoprene boot connector, 105°C, Tefzel insert |
| R6QN-0-J9T2-64 | 64 ft cable, 150°C, Tefzel jacket; 2 socket Neoprene boot connector, 105°C, Tefzel insert |
| R6QNI-0-J9T2-16 | 16 ft cable, 150°C, Tefzel jacket; 2 socket Neoprene boot connector, 105°C, Tefzel insert, electrically isolated |
| R6QNI-0-J9T2-32 | 32 ft cable, 150°C, Tefzel jacket; 2 socket Neoprene boot connector, 105°C, Tefzel insert, electrically isolated |
| R6QNI-0-J9T2-64 | 64 ft cable, 150°C, Tefzel jacket; 2 socket Neoprene boot connector, 105°C, Tefzel insert, electrically isolated |
| HTS KIT | High temperature solder kit |
| R6 | 2-socket, MIL-C-5015 accelerometer connector kit |
| R6Q | High temperature, 2-socket MIL-C-5015 accelerometer connector kit |
| J9T2A-500 | 500ft cable, 200°C, Teflon jacket |
| J9T2A-1000 | 1000ft cable, 200°C, Teflon jacket |
| J9F-500 | 500ft cable, 200°C, Teflon jacket, foil shield with drain wire |
| J9F-1000 | 1000ft cable, 200°C, Teflon jacket, foil shield with drain wire |
| J9T2-500 | 500ft radiation resistant cable, 150°C, Teflon jacket, braided shield |
| J9T2-1000 | 1000ft radiation resistant cable, 150°C, Teflon jacket, braided shield |
| J9T2AS-500 | 500ft cable, 200°C, Teflon jacket, stainless steel overbraid |
| J9T2AS-1000 | 1000ft cable, 200°C, Teflon jacket, stainless steel overbraid |
| J10-500 | 500ft cable, 125°C, Enviroprene jacket |
| J10-1000 | 1000ft cable, 125°C, Enviroprene jacket |
| J9T3A-500 | 500ft cable, 200°C, 3-conductor, shielded, Teflon jacket |
| J9T3A-1000 | 1000ft cable, 200°C, 3-conductor, shielded, Teflon jacket |
| J9T4-500 | 500ft cable, 200°C, 4-conductor, shielded, Teflon jacket |
| J9T4-1000 | 1000ft cable, 200°C, 4-conductor, shielded, Teflon jacket |
| PCD200-24-B-N-100 | Dual-input with 2-line process display, 12-24 VDC |
| PCD200-24-SB-420-140 | Dual-input panel meter with 2-line Sunbright process display, 2 relays output |
| PCD200-265-B-N-200 | Dual-input with 2-line process display, 85-265 VAC |
| PCD200-265-B-2R-200 | Dual-input panel meter with 2-line process display, 2 relays output |
| VSW-100 | Velocity vibration switch with two relays |
| PCD100-24-B-420 | Single input with process display, 4-20 mA output, 12-36 VDC |
| PCD100-265-B-N-0 | Single input with process display, 85-265 VAC |
| VLS06BF-G-N-S | 6 channels switchboxes |
| VLS08BF-G-N-S | 8 channels |
| VLS12BF-G-N-S | 12 channels |
| VLS12EF-G-N-S | 12 channels |
| VLS24EF-G-N-S | 24 channels |
| VLS36EF-G-N-S | 36 channels |
| VLS48EF-G-N-S | 48 channels |
| VLS06BS-C-N-S | 6 channels |
| VLS08BS-C-N-S | 8 channels |
| VLS12BS-C-N-S | 12 channels |
| VLS12ES-C-N-S | 12 channels |
| VLS24ES-C-N-S | 24 channels |
| VLS36ES-C-N-S | 36 channels |
| VLS48ES-C-N-S | 48 channels |
| VLL06BF-C-N-S | 6 channels, conduit |
| VLL06BF-G-N-S | 6 channels, cable grips |
| VLL12BF-C-N-S | 12 channels, conduit |
| VLL12BF-G-N-S | 12 channels, cable grips |
| VLL06BS-C-N-S | 6 channels, conduit |
| VLL06BS-G-N-S | 6 channels, cable grips |
| VLL12BS-C-N-S | 12 channels, conduit |
| VLL12BS-G-N-S | 12 channels, cable grips |
| CB2 | 2 standard vibration sensors, BNC jacks |
| CB4 | 4 standard vibration sensors, BNC jacks |
| CBT2-M12-G | 2 triaxial accelerometers, M12 jacks, terminal block inputs |
| CBT2-M12-M12 | 2 triaxial accelerometers, M12 jacks, M12 inputs |
| VLD06BF-G-N-S | 6 channels |
| VLD08BF-G-N-S | 8 channels |
| VLD12BF-G-N-S | 12 channels |
| VLD12EF-G-N-S | 12 channels |
| VLD24EF-G-N-S | 24 channels |
| VLD36EF-G-N-S | 36 channels |
| VLD48EF-G-N-S | 48 channels |
| VLD06BS-C-N-S | 6 channels |
| VLD08BS-C-N-S | 8 channels |
| VLD12BS-C-N-S | 12 channels |
| VLD12ES-C-N-S | 12 channels |
| VLD24ES-C-N-S | 24 channels |
| VLD36ES-C-N-S | 36 channels |
| VLD48ES-C-N-S | 48 channels |
| iT051 | 7-module DIN box |
| iT051C | 7-module DIN box with clear cover |
| iT052 | 25-module DIN box |
ACELEROMETRO, WILCOXON, 780C USO: PARA MEDIR DESPLAZAMIENTO, VELOCIDAD O ACELERACION DE UN CUERPO 780C
VIBROMETRO, WILCOXON, MAC800 MAC800 MAC800 VIBRATION METER WITH ACCESSORIES
Vibration Meter Comparison MAC800
CABLE, WILCOXON, R6W-0-J10-20 CABLE PARA ACELEROMETRO CAB CAB R6W-0-J10-20 METERS
Vibration Meter Comparison MAC810
ACELEROMETRO, WILCOXON, 787B USO: PARA MEDIR DESPLAZAMIENTO, VELOCIDAD O ACELERACION DE UN CUERPO 787B
Vibration Meter Comparison MAC820
CABLE, WILCOXON, R6WP-0-J88C-06 R6WP-0-J88C-06 COLLED CABLE ASSEMBLY R6WP-0-J88C-06 CABLE PARA ACELEROMETRO
ACELEROMETRO, WILCOXON, 787B 787B MODE 787B, LOW PROFILE GENERAL PURPOSE ACCELEROMETER
ACELEROMETRO, WILCOXON, 787-500 787-500 SIDE-EXIT, O -FREQUENCY ACCE EROMETER
MAGNETO, WILCOXON, MD035 MD035 MAGNET, TWO-POLE SMALL
ACELEROMETRO, WILCOXON, 780FM-2-J88C 780FM-2-J88C MODEL 780FM-2-J88C
CABLE PARA ACELEROMETRO, WILCOXON, R6QL-0-J9T2A-64 R6QL-0-J9T2A-64 R6 I-0-J9T2A-64 20M CABLE ASSEMBLY